IEC60068-2-75 Impact Testing Machine / Vertical Hammer Test Apparatus 0-1m Drop Height

IEC60068-2-75 Impact Testing Machine / Vertical Hammer Test Apparatus 0-1m Drop Height

The hammer consists basically of a striking element which falls freely from rest through a vertical height, selected from Table 2, on to the specimen surface held in a horizontal plane. Impact Testing Machine
The characteristics of the striking element shall comply with Table 1 . The fall of the striking element shall be along a guideway, for example three or four rails, with negligible braking. This guideway shall not rest on the specimen and the striking element shall be free of the guideway on striking the specimen. In order to reduce the friction, the length l of the striking element shall not be smaller than its diameter D, and a small gap (for example 1 mm) shall be provided between the striking element and the guideway. Impact Testing Machine

Standard: IEC 60068-2-75 Test Ehc: vertical hammer, UL498 clause SD7.2

Application: This device is intended to test the mechanical strength test of the shell of the electric appliance for house hold and similar purpose, as well as test drop impact resistance of the lamp. Impact Testing Machine

Test sample: Electric appliance, plug and socket, luminaries for house hold and similar purpose

Feature: Comply with the requirement of standard IEC60068-2-75. Cantilever type rack, release the impact element by electromagnet, impact height determined by guide tube. Impact Testing Machine

Parameters:

IEC 60068-2-75 Impact Testing Machine

1m Drop Height Impact Testing Machine

Vertical Hammer Test Apparatus

IEC60068-2-75 Impact Testing Machine / Vertical Hammer Test Apparatus 0-1m Drop Height Images